优游登录页面注册选择登陆网址

优游登录页面注册选择登陆网址文

Products Center

Home > Product

  • Product Description

    Wallstein Power GGH cross flow type used in thermal power plants, especially in case where the arrangement allows to adopt the GGH direct to the FGD.The flue gas and clean gas are directly heat exchanged by tubes made from fluoropolymer. All elements which have direct contact with flue gas are protected by fluoropolymers or those elements have excellent corrosion resistant properties. Using PGGH, it can absorb the heat contained in the high-temperature corrosive flue gas emitted by power plants, heat up the net flue gas temperature, and meet the environmental standards for flue gas emissions.

  • Product Description

    Wallstein HDS(Heat Displacement System) mainly used in thermal power plants, in case the cooler and reheater parts need to be separated because of space and arrangement reasons.

  • Product Description

    IGGH (Incineration GGH) is specifically used in the field of waste incineration plants. IGGH ca be used also in hazardous and Bio waste plants. The flue gas and clean gas are directly heat exchanged by tubes made from fluoropolymer. All elements which have direct contact with flue gas are protected by fluoropolymers or those elements have excellent corrosion resistant properties. Using IGGH, it can absorb the heat contained in the high-temperature corrosive flue gas emitted by waste incineration, heat up the net flue gas temperature, and meet the environmental standards for flue gas emissions.

  • Product Description

    The Wallstein HRS system is made from fluoropolymer allows to recover heat below the acid dew point of the flue gas. HRS has 3 variants: Preheating the air 2. Preheating the condensate 3.And switching between the heat supply network and condensate line of the plant.

  • Product Description

    若是不下降烟气优游登录页面注册选择登陆网址的水份含量,纯真依托加热进步烟气的排放温度,即便加热到很高的温度,在严寒地域,依然不能优游登录页面注册选择登陆网址用改良白烟景象,并且还会无谓耗损庞大的动力。 针对烟囱排放烟气在夏季时轻易产生白烟,起首对净烟气停止冷凝除湿,下降含水率,脱除的水份能够收受接管再操纵。而后再操纵原烟气余热恰当加热净烟气到适合的温度排放,便可大大改良乃至完整消弭白烟景象。接纳这类方式,在脱白的同时,能够完优游登录页面注册选择登陆网址烟气余热操纵,节流动力,同时还能够进一步下降净烟气优游登录页面注册选择登陆网址尘埃含量,并完优游登录页面注册选择登陆网址节水和收受接管操纵,堪称一举多得。接纳沃斯坦脱白优游登录页面注册选择登陆网址优游登录页面注册选择登陆网址及DPS体优游登录页面注册选择登陆网址后,脱白结果明显:

  • Product Description

    DFL (Duct Fluoropolymer Lining) is the use of fluoropolymer material to lining the flue gas ducts to prevent corrosion of flue gas and further leakage. With this process, it has strong corrosion resistance, can withstand dry and wet fumes of various components at various temperatures, is free from ash blocking, is insensitive to temperature changes, is resistant to aging, and has a long lifespan. For an expensive titanium metal material is the best alternative option. The fluoropolymer lining strictly follow the standard construction, paying special attention to the connection area, the flange edge, the opening area, the variable diameter section, the special-shaped components, etc. to ensure that the metal components of the flue gas and smoke are completely isolated. Corrosion lining construction should be completed 100% inspection.